ILDA DB25F DRIVER

Controls the green intensity. For example, a digitizer can draw a shape using a “deep blue” colour; when the show plays back, colour channel 4 is used to display the shape. The control mode switch will check the 4th Pin InterLock A and the 17th Pin InterLock B to adjust whether there has computer with interfacial card be connected to fixture. A differential voltage level of 0V indicates zero intensity and that the beam is fully blanked. And let the light beam at the suitable angle. A differential voltage level of 0V shall place the beam in the center of the screen vertically.

Uploader: Kijora
Date Added: 25 December 2010
File Size: 69.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 16282
Price: Free* [*Free Regsitration Required]

X-Laser Skywriter HPX Professional Laser System Bundle with EZ Variance and QuickShow XL

Maintain the distance at least 10M above from the equipment to the object. Red nm to nm Green nm to nm Blue nm to nm Deep Blue supplied on user1 nm to nm Yellow supplied on user2 nm to nm. Most full-colour ilad displays at present are ion lasers strong in red and green, but deficient in deep blue. A differential voltage level of 0 volts shall produce the smallest beam diameter.

Yellow supplied on user2 nm to nm. CD or DVD discs can provide more than three colour channels.

Driver for Laserworld Showeditor USB interfaces

To use the original package when transport again and to avoid shake. Depending on the laser wavelengths used, shows played from ADAT may be weak in dark blue and violet without special hardware “tricks” on the projector. Don’t seperate laser machine from laser power and repaire them by yourself otherwise no good repair service will be supplied. And do not pull the electronic power line.

  AUTOMATIONDIRECT EA-MG-PGM-CBL DRIVER

Signals required to be present for proper projector operation; Signals which are optional; and User-defined signals, which are not required sb25f are provided for flexibility. If this loop is broken, it is required that projectors close a shutter or turn off the laser or take ilxa actions that prevent light from being emitted from the projector.

Please do not open or close the equipment frequently that’s to avoid any affect to the life span of the laser diode, and try the best to avoid the long time working. Projector Return Signal Return signal from the projector. Blue nm to nm.

A differential voltage level of 0V shall produce no red output. Signal Specification The DB graphics connector standard ila fourth certain signals.

These signals are tied together at the signal source.

See “Colour Channel Usage” section, below Yellow Where it is desired to have a separate signal which controls the yellow intensity, this shall be supplied on the “User-defined signal 2” pair. Dark blues and violets look washed out. The Colour Channel Usage chart below insures consistency when systems and projectors use more than three colours.

Due to the characteristic of the laser diode, after three hours working, it should be close at least 25 minutes until the laser diode cooling then work again. Signal inputs shall be designed to accept this voltage without any damaging results. A differential voltage level of 0V shall place the beam in the center of the screen vertically. Please use the soft cloth to clean the surface of product. Field Change For applications using sequential-field stereoscopic techniques, the field selected polarization shall be supplied on the “User-defined signal 4” pair.

  MPU 401 ADAPTER DRIVER

When there are only three colour signals, it is impossible to get dark blues nm or vibrant violets nm alone. A differential voltage level of 0V indicates zero intensity and that the beam is fully blanked. We provide this information as a service to laserists using the Backstage area.

Laser Light ILDA ishow software DMX laser light Projector/Stage laser lighting laser show software

Download method 2 used MIC: Maintain Please use cotton stick dipped alcohol to wipe the mirrors at regular. When install this equipment please make sure there’s no flammable surfaces decorated things, etc within at least 1.

Input power, with inner fuse. Ulda is also recommended that the impedance of these outputs be between and ohms so that the cable impedance can be accommodated without ringing or other transmission line effects. A differential voltage level of 0 volts shall produce no deep-blue output.